Chain oiler for the KTM 1090 Adventure
2 installation reports for this model
Installation report by Willi
KTM 1090 Adventure – year of manufacture 2018
This is how Willi solved the installation – unfortunately we cannot guarantee that it works correctly, as we were not able to check the installation ourselves.
Oil reservoir 60 ml
Behind the right side cover
Metering valve
Under the cross brace next to the left pillion footpeg
Nozzle
Between the swingarm and the chain guide plate – the plastic of this part was worked so that the aluminium bracket fits in between and cannot twist thanks to the recess. On the other side of the guide part, a washer was placed in between because of the height.
Switched 12 V supply
ACC 1 and 2 are located in the tool compartment at the rear of the machine
Rain switch
At the right mirror mount, cable routed under the fuel tank along the right side of the machine to the tool compartment
Control unit
On the right-hand side of the subframe, in the tool compartment
Installation report by Franz
KTM 1090 Adventure – year of manufacture 2017
This is how Franz solved the installation – unfortunately we cannot guarantee that it works correctly, as we were not able to check the installation ourselves.
Oil reservoir 60 ml
Behind the right side cover.
Metering valve
The valve was bolted to the battery box with the bracket.
Nozzle
Between the swingarm and the chain guide plate – the plastic of this part was worked so that the aluminium bracket fits in between and cannot twist thanks to the recess. On the other side of the guide part, a washer was placed in between because of the height.
Switched 12 V supply
Connections at the rear by the taillight, where the ACC connection is as well.
Rain switch
On the right mirror mount.
Control unit
Under the seat, at the rear.
Have you fitted a MOFESSOR? Contribute your own installation report – directly here, with your photos.
