Chain oiler for the Yamaha Tracer 9 GT
2 installation reports for this model
Installation report by Lukas
Yamaha Tracer 9 GT – year of manufacture 2025
This is how Lukas solved the installation – unfortunately we cannot guarantee that it works correctly, as we were not able to check the installation ourselves.
Oil reservoir 60 ml
Attached to the left side of the rear subframe.
Metering valve
Attached to the rear subframe's cross brace using cable ties.
Nozzle
Oil line routed along the frame and swingarm using hose clips. The application nozzle is then mounted on the inside of the swingarm, applying oil to the rear sprocket.
Switched 12 V supply
Connected to the accessory connector at the rear. Additionally, the 12 V connector "YAMAHA Type 1" is required.
Rain switch
Rain switch mounted on the left side of the handlebar.
Control unit
Placed at the rear, under the passenger seat.
Installation report by Christian
Yamaha Tracer 9 GT – year of manufacture 2021
This is how Christian solved the installation – unfortunately we cannot guarantee that it works correctly, as we were not able to check the installation ourselves.
Oil reservoir 60 ml
At the rear under the taillight/brake light cover, wrapped in foam without blocking the vent. The position of the T-piece is shown here as well. Secured to the subframe with cable ties.
Metering valve
Attached under the subframe cross brace with two cable ties
Nozzle
At the drive sprocket, inner side, hose routed along the gear position sensor
Switched 12 V supply
The switched positive was tapped from the blue wire of the taillight connector under the seat, then soldered and insulated.
Rain switch
Attached to the left mirror.
Control unit
Attached to the subframe under the seat with a cable tie. The rotary control was aligned to the front for adjustment.
Have you fitted a MOFESSOR? Contribute your own installation report – directly here, with your photos.
