Product Description
Many motorcycles leave the factory without a USB port, and retrofitted sockets are often too bulky for a clean installation. On the road, vibration and water wear down socket and connector until the contacts fail, the connector kinks or the socket works loose. If the socket delivers too little power, your GPS runs flat on a ride despite being plugged in. This USB-C socket is designed around exactly these points: just 44×22×12 mm, electronics encapsulated in resin, connector supported and 36 W of charging power.
Benefits
-
44×22×12 mmFits wherever larger sockets have no room.
-
Electronics encapsulated in resin, IP67Rain, spray and vibration cannot reach the electronics.
-
Protective boot around the socketSupports connector and cable so vibration wears out neither connector nor socket, and keeps dirt and moisture away from the contacts.
-
36 W continuousDelivers 12 V at 3 A – more than a smartphone or tablet draws while navigating with the screen on.
-
6.3 mm blade terminalsPlug straight into the ACC connections on KTM, HUSQVARNA and GASGAS without an adapter, and into any 12 V electrical system via an adapter.
-
Fork-leg versionThe curved mounting surface sits directly against the fork leg, putting the socket within reach of the handlebar without an extra mount.
Compatibility
- All motorcycles with a 12 V electrical system | directly or with an adapter
Without an ACC connection, the socket is connected via adapters: the 12 V supply via the 12 V motorcycle connector that matches the motorcycle or the fuse tap, and earth via the ring terminal adapter, which fits earth points with screws up to M6.
If the ACC connection is already in use, the ACC splitter divides it. For mounting locations further away, the ACC extension cable extends the connection cable by 50 cm.
In the box
- 1× USB-C socket 36 W
- 1× 3M VHB adhesive pad
If you connect directly to the battery or to a circuit fused at more than 10 A, an additional fuse rated at max. 10 A is recommended. It is not included.
