Product Description
Many motorcycles have no USB port from the factory, and retrofitted sockets are often too large for a clean installation. On the road, vibration and water wear on the socket and plug until contacts fail, the plug kinks or the socket works loose. If the socket delivers too little power, the navigation device drains on tour despite being plugged in. The USB-C socket is designed around these points: 44×22×12 mm small, electronics encapsulated in resin, plug supported and 36 W charging power.
Benefits
-
44×22×12 mmFits wherever larger sockets cannot be accommodated.
-
Electronics encapsulated in resin, IP67Rain, spray and vibration do not reach the electronics.
-
Protective boot around the socketSupports plug and cable so that vibration wears out neither the plug nor the socket, and keeps dirt and moisture away from the contacts.
-
36 W in continuous operationDelivers 12 V at 3 A – more than a smartphone or tablet draws during navigation with the display on.
-
6.3 mm blade terminalsFit the ACC connections of KTM, HUSQVARNA and GASGAS without an adapter, and any 12 V electrical system via an adapter connector.
-
Fork leg versionThe curved mounting surface sits directly against the fork leg, placing the socket within reach of the handlebar without an additional bracket.
Compatibility
- All motorcycles with a 12 V electrical system | direct or with adapter connector
The socket is connected to a switched 12 V supply or, via the Battery Guard, directly to the battery. Whether accessories are needed, and which ones, depends on the connection on the motorcycle. For mounting locations further away, the ACC extension cable extends the connection cable by 50 cm.
In the box
- 1× USB-C socket 36 W
- 1× 3M VHB adhesive pad
When connecting directly to the battery or to a line fused at more than 10 A, an additional fuse of max. 10 A is recommended. It is not included.
